Operating manual Pallas 945029
9.2.3
Mounting the soapstone side cladding
1,5 mm
Fig. 13: Undoing the bolts
Fig. 14: Hanging the soapstone side clad-
ding
1) If the steel cladding is mounted, it must first be dis-
2) Unscrew hexagonal-head bolts 1-1.5 mm.
3) Hang the soapstone cladding (1) on the screws from
2
4) Repeat the stages on the other side of the stove to
5) Reattach rear panel and lid.
1
EN
mounted.
ð Proceed as described in the section Removing the
steel side cladding [}on page 103].
top to bottom; while at the same time pressing down
towards the stove and attaching the top cover (2).
mount the soapstone side cladding.
9 | Installation
81