Mounting The Ceramic Side Cladding - Austroflamm Pallas 945029 Betriebsanleitung

9 | Installation
9.2.2

Mounting the ceramic side cladding

4 mm
Fig. 11: Undoing the bolts
Fig. 12: Hanging the ceramic side cladding
80
EN
1) If the steel cladding is mounted, it must first be dis-
mounted.
ð Proceed as described in the section Removing the
steel side cladding [}on page 103].
2) Unscrew hexagonal-head bolts at least 4 mm.
3) Hang the ceramic side cladding on the screws from
top to bottom and simultaneously press the lower part
of the ceramic side cladding towards the stove.
4) Repeat the stages on the other side of the stove to
mount the ceramic side cladding.
5) Reattach rear panel and lid.
Operating manual Pallas 945029