How To Replace: Lamp - Electrolux EH6L40YCN Benutzerinformation

Step 3 Close the oven door to the
first opening position (approx‐
imately 45° angle). Hold the
door with one hand on each
side and pull it away from the
oven at an upwards angle.
Put the door with the outer
side down on a soft cloth on a
stable surface.
Step 4 Hold the door trim (B) on the
top edge of the door at the
two sides and push inwards
to release the clip seal.
Step 5 Pull the door trim to the front
to remove it.
Step 6 Hold the door glass panels on
their top edge one by one and
pull them up out of the guide.
Step 7 Clean the glass panel with
water and soap. Dry the glass
panel carefully. Do not clean
the glass panels in the dish‐
washer.
Step 8 After cleaning, do the above
steps in the opposite se‐
quence.
Step 9 Install the smaller panel first, then the larger and the door.
Make sure that the glasses are inserted in the correct position otherwise the surface of
the door may overheat.

11.5 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
CARE AND CLEANING
45°
2
B
1
135/144