Settings; Blackmagic Converters Setup - Blackmagic Design ATEM Installationsanleitung

Settings

You can adjust different settings for ATEM Microphone Converter using the Blackmagic
Converters Setup utility and via the small switches on the side of your converter.
Adjust settings using the Blackmagic Converters Setup utility and the switches on the side of your converter

Blackmagic Converters Setup

Blackmagic Converters Setup is a software utility used to change settings and
update the internal software in your ATEM Microphone Converter.
First, download and install the latest Blackmagic Converters software from the
Blackmagic Design support center at
To use Blackmagic Converters Setup:
1 Connect ATEM Microphone Converter to your computer via USB.
2 Launch Converters Setup. Your converter model will be named in the utility home page.
3 Click on the circular 'setup' icon or the image of your ATEM Microphone Converter to open
the audio settings.
www.blackmagicdesign.com/support
Settings 8