Connecting Additional Converters - Blackmagic Design ATEM Installationsanleitung

Level Type
Icons to the left of the waveform will display the current level type set using the switches
on the side of your converter.
Meters

Connecting Additional Converters

Up to 4 ATEM Microphone Converters can be connected to the one HDMI output so you can
see all 16 channels at once. When connecting more than 4 converters together, connect a
monitor to the first of each additional bank of 4 ATEM Microphone converters so you can view
each additional microphone converter.
MADI 29-32 MADI 25-28
MADI 13-16
REF OUT TIMECODE OUT MADI OUT
USE ONLY WITH A 250V FUSE
12-30V 6A REF IN TIMECODE IN MADI IN
This illustration shows 8 microphone converters daisy chained together to send 32 channels of audio via MADI
to ATEM Television Studio HD8
LINE Line Level
Mic Level
MIC
Phantom Power
+48
Audio meters to the right of the waveform display the
VU level. The size of the VU meters on the HDMI output
will decrease as you connect more converters.
MADI 21-24
MADI OUT to MADI IN
MADI 9-12 MADI 5-8
MADI OUT to MADI IN
1 2 3 4 5
USB A USB B REMOTE TALKBACK SDI OUTPUTS
1 2 3 4 5
ETHERNET SDI INPUTS
MADI 17-20
MADI 1-4
6 7 8
L L
AUX 1 PROGRAM
6 7 8
R R
AUX 2 MULTIVIEW MULTIVIEW CONTROL OUT STUDIO OUT
Using the Monitor Output
MADI 17-32
MADI 1-16
PUSH PUSH PUSH
L
R
CH 1 CH 2
STEREO IN ANALOG AUDIO IN TALKBACK
14