Setup Settings - Blackmagic Design ATEM Installationsanleitung

Digital Preamps
Adjust the gain for each input using the digital preamp slider controls up to a maximum of +30dB.
Adjust the gain using the sliders
Different microphone types and brands can vary widely in analog audio levels, so the digital
preamplifiers allow compensation for the specific brand of microphone you use. The digital
preamplifier is processed using internal 32 bit RAW audio bit depth and that is much greater
precision than the MADI audio standard can support. This results in an extremely clean and
noise free gain stage.
The HDMI output enables you to measure the changes made to the audio waveform and meter
levels as you adjust the preamplifier sliders. The ATEM's internal mixer can then be used to
finesse these levels into the final mix.

Setup Settings

Setup settings let you change the name of your microphone converter, change network
settings and displays the current version of your microphone converter's internal software.
Settings 10