Hardwareinstallation - Velleman CAMCOLBUL28 Bedienungsanleitung

• Protect this device from shocks and abuse. Avoid brute force when
operating the device.
• DO NOT use this product to violate privacy laws or perform other illegal
activities.
4. Features
• weatherproof
• with B/W night vision (IR LEDs)
• super high resolution
• special functions via on-screen display (OSD) set-up menu
shutter / AGC
o
white balance.
o
5. Overview
Refer to the illustrations on page 2 of this manual.
1 IR LEDs
2 lens
3 light sensor
4 sunshield
6. Hardware installation
Refer to the illustrations on page 2 of this manual.
• Choose a location for the camera, keeping following guidelines in mind:
do not install the camera in locations where extremely high or low
o
temperatures or excessive vibrations may occur.
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
o
or reflections (e.g. metal doors).
• Use the mounting bracket [5] to determine the location of the mounting
holes. Drill the holes and secure the bracket [5] using screws.
• Attach the camera to the mounting bracket [5] with the camera
bolt [7].
• Connect the power connector [B] to the 12VDC power supply (not incl.).
• Connect the BNC connector [A] to a monitor (not incl.).
• Point the camera towards the field of interest and tighten the position
bolt.
• Manually adjust the zoom and focus with the screws [6].
V. 02 – 10/05/2012
CAMCOLBUL28
5 bracket
6 zoom and focus adjust
7 camera bolt
4 ©Velleman nv