Hardwareinstallation - Velleman CAMTVI6 Bedienungsanleitung

4. Features
This HDCCTV or TVI (High Definition Transport Video Interface) camera is
equipped with a CMOS image sensor. The video image quality is 1080P. The
IR-cut filter will filter the IR light, so it cannot distort the colour image. When
it gets dark, the camera automatically switches to night mode. In night mode,
the camera enables the IR LEDs and disables the IR-cut filter.
 weatherproof
 with B/W night vision (IR LEDs)
 1080P video signal
 vandal-proof bracket
 varifocal lens
 no OSD menu
5. Overview
Refer to the illustrations on page 2 of this manual.
1 IR LEDs
2 lens
3 light sensor
4 sunshield
6. Hardware installation
Refer to the illustrations on page 2 of this manual.
 Choose a location for the camera, keeping following guidelines in mind:
do not install the camera in locations where extremely high or low
o
temperatures or excessive vibrations may occur.
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
o
or reflections (e.g. metal doors).
 Use the mounting bracket [5] to determine the location of the mounting
holes. Drill the holes and secure the bracket [5] using screws.
 Attach the camera to the mounting bracket [5] with the camera bolt [7].
 Connect the two wires for an analogue PAL signal; leave them
unconnected for a HD 1080P TVI signal.
 Connect the power connector [B] to the 12 VDC power supply (not incl.).
 Connect the BNC connector [A] to a monitor (not incl.).
 Point the camera towards the field of interest and tighten the position bolt.
 Manually adjust the zoom and focus with the screws [6].
V. 02 – 10/02/2016
CAMTVI6
5 bracket
6 zoom and focus adjust
7 camera bolt
4 ©Velleman nv