Hardwareinstallation; Osd Settings - Velleman CAMTVI14W Bedienungsanleitung

4. Features
 weatherproof
 with B/W night vision (IR LEDs)
 1080P video signal
 vandal-proof housing
5. Overview
Refer to the illustrations on page 2 of this manual.
1 sunshield
2 lens
6. Hardware installation
Refer to the illustrations on page 2 of this manual.
 Choose a location for the camera, keeping following guidelines in mind:
do not install the camera in locations where extremely high or low
o
temperatures or excessive vibrations may occur.
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
o
or reflections (e.g. metal doors).
 Use the mounting bracket to determine the location of the mounting
holes. Drill the holes and secure the bracket using screws.
 Connect the two wires for an analogue PAL signal; leave them
unconnected for a HD 1080P TVI signal.
 Connect the power connector to the 12 VDC power supply (not incl.).
 Connect the BNC connector to a monitor (not incl.).
 Point the camera towards the field of interest and tighten the position bolt.
7.

OSD Settings

There is a small joystick in the camera cable that allows you to adjust the
settings of the camera using an on-screen display (OSD).
In the OSD menu:
 NEXT/BACK: select this option and press the middle button to go to the
next/previous page of options in the menu.
V. 01 – 27/02/2017
CAMTVI14W
 Press the middle button to access the menu, or
to select an option.
 Press the up and down buttons to move up and
down in the menu.
 Press the left and right buttons to modify the
menu parameters.
4
4 light sensor
5 bracket
©Velleman nv