Hardwareinstallation - Velleman CAMTVI11 Bedienungsanleitung

4. Features
This HD CCTV camera is equipped with a CMOS image sensor. The video
image quality is 1080P. The video signals can be switched between HD-TVI,
HD-CVI, AHD and Analog video signals. The IR-cut filter will filter the
IR light, so it cannot distort the colour image. When it gets dark, the camera
automatically switches to night mode. In night mode, the camera enables
the IR LEDs and disables the IR-cut filter.
 weatherproof
 with B/W night vision (IR LEDs)
 1080P video signal
 vandal-proof bracket
 varifocal lens
 special functions via On-Screen Display (OSD) set-up menu
 multiple video signal outputs: TVI, AHD, CVI, CVBS
5. Overview
Refer to the illustrations on page 2 of this manual.
1 IR LEDs
2 lens
3 light sensor
4 sunshield
6. Hardware installation
Refer to the illustrations on page 2 of this manual.
 Choose a location for the camera, keeping following guidelines in mind:
do not install the camera in locations where extremely high or low
o
temperatures or excessive vibrations may occur.
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
o
or reflections (e.g. metal doors).
 Use the mounting bracket [5] to determine the location of the mounting
holes. Drill the holes and secure the bracket [5] using screws.
 Attach the camera to the mounting bracket [5] with the camera bolt [7].
 Connect the two wires for an analogue PAL signal; leave them
unconnected for a HD 1080P TVI signal.
 Connect the power connector [B] to the 12 VDC power supply (not incl.).
 Connect the BNC connector [A] to a monitor (not incl.).
 Point the camera towards the field of interest and tighten the position bolt.
 Manually adjust the zoom and focus with the screws [6].
V. 01 – 01/07/2016
All manuals and user guides at all-guides.com
CAMTVI11/CAMTVI11Z
5
5 bracket
6 zoom and focus adjust
7 camera bolt
©Velleman nv