Red Sea ReefRun Dual Controller Benutzerhandbuch Seite 9

LED Indicators
Pump 1 - 2 Status LED Indicator:
• Solid Red light – Pump PSU is attached.
• No Red light – Pump PSU is not attached.
Settings LED Indicator:
• Solid Red light – RRDC is connected to the home-network.
• Blinking Red light – RRDC is in Wi-Fi Access Point (AP) mode (can
be discovered by Wi-Fi devices).
• Rapid Blinking Red light – Controller cannot access the home-
network (network name and/or password are incorrect or known
network has become unavailable)
• No Red light – RRDC Wi-Fi is off.
• Double blink – indicates change of status / end of process.
RSK Sensor Status LED Indicator:
• Solid Red light – Self-leveling is enabled
• No Red light –Self-leveling is disabled.
• Blinking Red light – Pump intensity is "Self-leveling"
Flow intensity LED Indicator:
• Solid Red lights – Pump intensity from 10% to 100%
• No Red lights – Pump is OFF.
• Blinking Red lights 10% & 100% – Pump is missing/disconnected
• Blinking Red lights 20%,30%,80% & 90% – Pump malfunction
(stalled or not in water)
50% 60%
40%
30%
20%
10%
Pump Disconnect
50% 60%
40%
30%
20%
10%
Pump malfunction
Red Sea ReefRun ® Dual Controller
ENG
70%
80%
90%
100%
70%
80%
90%
100%
9