Herunterladen Inhalt Inhalt Diese Seite drucken

Red Sea ReefRun Dual Controller Benutzerhandbuch Seite 16

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Red Sea ReefRun
®
Dual Controller
Quick Action Settings
The Quick Actions are activated from the ReefBeat App and will
be implemented simultaneously for all devices that are configured
for each action.
Each pump is configured separately for the quick action buttons. If the 2
pumps are linked there is a single setting for both.
Feed
When connecting a pump to the Feed Quick Action there are 3
parameters to set:
Feed duration time – enter the desired time period for the Feed
settings to be implemented. At the end of the duration time the pump
will automatically return to the scheduled settings.
Feed mode Intensity – set the desired flow intensity for the ReefRun
pumps during the Feed period. To switch the pump OFF, set the intensity
to zero. The DC-Skimmer can only be switched OFF and not set at a
different intensity.
Feed start delay – this will delay the start (and finish) of the Feed
duration time for the specified "delay" period (in minutes). Use this
setting, for example, if you want the skimmer to be switched OFF a few
minutes before the return pump or visa-versa.
Maintenance/Emergency
Maintenance/Emergency modes will immediately shut down all devices
that are configured for these Quick Actions buttons and will resume their
scheduled settings when the Quick Actions is switched off.
To stagger the restart of the pumps when the Quick Actions is switched
16
off, set the desired "Quick Actions Return delay" for each pump
individually. Setting a Zero delay will restore the scheduled settings
immediately. Use this setting, for example, if you want the skimmer to
restart a few minutes after the return pump to allow the water level in
the sump to return to normal.
Notifications
When the RRDC has a permanent connection to the internet, a
notification will be sent to your mobile whenever connection to the
ReefBeat cloud is lost.
A "No Connectivity" message could be due to a power or internet
outage, or router failure.
You will also receive notifications about issues that require your
immediate attention such as a pump malfunction or a full skimmer cup.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis