Red Sea ReefRun Dual Controller Benutzerhandbuch Seite 14

Red Sea ReefRun ® Dual Controller
together as a single unit sharing all the same settings such as schedule
and all on/off actions etc.
If you are planning to use the DC-pumps as wave pumps you can
customize the wave pulse time for a uniform wave for each pump. If the
pumps are linked, they can be synced to pulse together or anti-synced to
pulse alternately.
Uniform Wave Settings
To use the DC-pumps as wave pumps you can customize the wave pulse
time for a uniform wave for each pump. If the pumps are linked, they
can be synced to pulse together or anti-synced to pulse alternately.
Homepage>Settings Page>Pump>More Settings>Uniform Wave
If you wish to create a daily schedule of different pump intensities or
wave pulse times see the Custom daily schedule option below.
Note: If you disconnect and reconnect a different model of pump to the
one set up on each port, the flow intensity LED Indicators 10% & 100%
will blink and the ReefBeat App will display the message "incorrect
pump". Simply reconnecting the correct pump will restore the unit to
normal operation.
Setting up REEFER DC-Skimmer
Full instructions for installing the Reefer Skimmer are provided in the
Reefer Skimmer instruction manual. Make sure that you have purchased
the DC version of the skimmer or the Reefer Skimmer upgrade kit that
includes the PSK DC-1200 pump, skim sensor and control cable so that it
14
can be connected to the RRDC.
The RRDC will identify that you have connected the PSK DC-1200
pump, however, you will need to select your Reefer Skimmer model
(RSK300/600/900) to implement the correct default pump intensity
settings, as they all use the same pump. The default pump intensity for
each model has been set to provide the optimal airflow and air/water
contact time. This setting considers the size of the reaction chamber
and performance of the venturi. You can manually adjust the flow
intensity at any time however we recommend that you use the default
intensities.
The default setting is for a continuous operation of the skimmer (Always
ON) at the pump intensity shown in the settings page of the App. The
skimmer can be set to OFF with the intensity setting saved, which will
be reinstated when it is turned back ON. Alternatively, the skimmer can
be set to "Self-leveling" which will automatically regulate the intensity
if either over-skimming or full-cup conditions are reached. The RRDC
will identify if you have connected the skim sensor, which needs to be
connected before the ReefBeat App will enable the setting option for the
self-leveling features. Remember to press the save button at the top of
the screen after making any changes to the settings.
DC-Skimmer Self-leveling
The Self-leveling feature of the ReefRun controller automatically
regulates the flow intensity of the DC skimmer pump based on the
dual action skim sensor located in the neck and collection chamber
of the collection cup. Before using the self-leveling features, the
skimmer should be set up as fully explained in the Reefer Skimmer
instruction manual by using the mechanical flow regulator to adjust its
performance.
Each of the self-leveling sensors can be activated / deactivated by
toggling each one individually in the App.