Herunterladen Inhalt Inhalt Diese Seite drucken

S&P COR-F-1000 N Bedienungsanleitung Seite 17

Vorschau ausblenden Andere Handbücher für COR-F-1000 N:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
OPERATION
REMOTE CONTROL CONNECTION
(This control is incorporated in the packaging of each air curtain)
CURTAIN MODEL
COR- F-1000 N
COR- F-1500 N
COR- F-2000 N
COR-3,5-1000 N
COR-6-1000 N
COR-9-1000 N
COR-9-1500 N
COR-12-1500 N
COR-18-2000 N
TR1-N THERMOSTAT CONNECTION (FIG. 6) (ACCESORY)
If ambient/hot air curtain is installed inside a small previous lobby, it is possible the installation of TR1-N ther-
mostat to control air curtain operation.
IF CONNECTION BETWEN TWO OR MORE AIR CURTAINS OF THE SAME MODEL (MAX. 5 UNITS), PLEASE REFER
TO WIRING DIAGRAM FROM FIG. 7.
NOTE: In the case of multiple connection, Installer must consider the increased number of feeders based on
the number of connected units. In order to interconnect two or more curtains it is predicted that the cables can
go through their interior. FIG. 8 shows a lateral cover on which a noticeable circular opening is present. This
opening allows easy breakage, thus enabling the installer to feed cables to the unit.
PROTECTION AGAINST OVERHEATING
The COR Air Curtains are fi tted with one thermal fuse which automatically disconnects the unit in case of over-
heating.
In the event of this happening please contact the offi cial S&P dealer in your area.
MAINTENANCE
The COR Air Curtains do not need any special maintenance, but it is recommended to keep the inlet and outlet
grilles clean. Clean them with a dry cloth (avoid using solvents or abrasive
detergents). Once a year, the inside parts should be cleaned by a qualifi ed electrician using compressed air or
a vacuum cleaner. Disconnect the unit from the mains supply before carrying out this operation.
PUTTING OUT OF SERVICE AND RECYCLING
EEC legislation and our consideration of future generations mean that we should always recycle ma-
terials where possible; please do not forget to deposit all packaging in the appropriate recycling bins.
If your device is also labeled with this symbol, please take it to the nearest Waste Management Plant
at the end of its servicable life.
AFTER SALES SERVICE
In case of any problem with the unit, it is advised to contact your S&P dealer. Any manipulation of the appliance
by personnel not appointed by S&P will cancel the guarantee.
S&P reserves the right to modify the product without prior notice.
REMOTE CONTROL MODEL
CR-F
CR-3,5 N
CR-6/9 N
EN
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis