IKEA Kulinarisk Betriebsanleitung Seite 26

ENGLISH
3. Press again and again until the
display shows: Function Lock.
4. Press to confirm.
To deactivate the function, press
display shows a message. Press
and then to confirm.
When you deactivate the
appliance, the function also
deactivates.
Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of any symbol.
1. Activate the appliance.
2. Set a heating function.
3. Press again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press to confirm.
Press any symbol (except for
function: Set + Go. The set heating function
starts.
When the heating function ends, an acoustic
signal sounds.
• Function Lock is on when the
heating function operates.
• The menu: Basic Settings lets
you activate and deactivate
the function: Set + Go.
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time if
a heating function operates and you do not
change any settings.
Temperature (°C)
30 - 115
. The
120 - 195
again
200 - 230
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
• Day brightness:
) to start the
Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.
Safety thermostat
Incorrect operation of the appliance or
defective components can cause dangerous
overheating. To prevent this, the oven has a
safety thermostat which interrupts the
power supply. The oven activates again
automatically when the temperature drops.
The Automatic switch-off does
not work with the functions: Light,
End Time, Duration.
deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
– when the appliance is activated.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– if the appliance is deactivated and
you set the function: Minute Minder.
When the function ends, the display
goes back to the night brightness.
26
Switch-off time (h)
12.5
8.5
5.5