About This Documentation; Scope Of Delivery; Transport And Storage; Product Description - Emerson AVENTICS PE7 Montageanleitung

1 About this documentation

Read this documentation completely, especially
ing with the product.
These instructions contain important information on the safe and appropriate as-
sembly, operation, and maintenance of the product and how to remedy simple
malfunctions yourself.
1.1 Documentation validity
This documentation provides supplementary information for handling pressure
sensors of series PE7.
This documentation is intended for:
System owners, system planning engineers, machine manufacturers, installers
1.2 Additional documentation
Observe the following related documents:
• Manufacturer's system documentation
• Documentation of other system components
• System description (R412028763)
QR code Description
Downloads and further information on this product can
be found on the product page at the Emerson Store.
1.3 Abbreviations used
This documentation uses the following abbreviations:
Abbreviation Meaning
NBR Nitrile Butadiene Rubber (acrylonitrile butadiene rubber)
PELV Protective Extra Low Voltage
PPE Personal protective equipment
SELV Safety Extra Low Voltage
2 Safety
2.1 About this chapter
• Read this chapter and this documentation completely before working with
the product.
• Keep this documentation in a location where it is accessible to all users at all
times.
2.2 Intended use
Applications
• Acquisition and monitoring of pressure values
• The product is intended for solely for professional use.
• The product is exclusively intended to be installed in an end product (a sys-
tem/machine) or to be assembled with other components to form an end
product.
Application area and location
• Industrial applications
• Indoor areas
Notes
• The product is not a safety component in terms of the Machinery Directive.
• The product is solely suited for fluids of fluid group 2.
2.3 Improper use
The product is not intended for use in explosive areas (explosion protection).
AVENTICS™ PE7 | R412028734-BAL-001-AA | English
chapter g 2. Safety before work-
2.4 Obligations of the operator
• The owner must ensure that persons who assemble, operate, disassemble, or
maintain products must not consume any alcohol, drugs, or pharmaceuticals
that may affect their ability to respond.
• The owner must ensure that PPE is used. Observe all specifications for the
overall system.
2.5 Personnel qualifications
Only personnel qualified for the tasks at hand are allowed to perform the activi-
ties described in this documentation. Depending on the activity, this requires ba-
sic knowledge in the following areas and knowledge of the relevant technical
concepts:
• Mechanics
• Pneumatics
• Electrics
2.6 Hazards
2.6.1 Material damage
Damage due to too high mechanical loads
• Never twist or bend the product and add-on parts, or mount them when they
are under tension.
• Do not use the product as a handle or step.
• Do not position any objects on the product.

3 Scope of delivery

• 1x Assembly instructions
• 1x Pressure sensor (see: catalog)

4 Transport and storage

4.1 Transporting the product
Hazards during transportation
• Proceed with caution and observe the information on the packaging when un-
loading and transporting the packaged product to the destination.
• Ensure that the product cannot fall down before the product is released from
the mountings.
• Take steps to avoid damage when lifting the product.
• Wear PPE.
4.2 Storing the product
Damage due to incorrect storage
Unfavorable storage conditions can result in corrosion and material deteriora-
tion.
• Only store the product in locations which are dry, cool, and prevent corrosion.
• Protect the product from direct sunlight and UV radiation.
• Keep the product in its packaging until the time of installation.
• Also observe any additional storage information on the product packaging.
• The maximum storage period is 1 year.
4.3 Returning the product
• Before returning the product: Get in touch with our contact address. See back
cover.
• Observe the storage conditions until such time as you return the product.

5 Product description

5.1 Brief description
The pressure sensor is an IO-Link sensor with TFT touch display.
12