Inhaltsverzeichnis
Werbung
TABLE OF MINI-TILLER'S TECHNICAL MAINTENANCE
7.3.
(AN ITEM MARKED WITH √ SHALL BE MAINTAINED)
Work interval
Content of
maintenance
Check and tighten
bolts and nuts
Check and add new
engine oil
Clean and change
engine oil
Check if there's oil
leakage
Clean dirt, weeds,
and oil stains
Solve problems
Adjust operating parts
Tension belt (*)
Gears and bearings
(*)
Interventions that must be carried out by your Dealer or by an Authorised Service Centre
(*)
LONG STORAGE OF MINI-TILLER
7.4.
If the tiller need be stored for a long time, the following measures should be taken to prevent rust and
erosion.
1. Seal up and store gasoline engine as per requirements in the manual of gasoline engine.
2. Clean dirt and slime on the outer surface.
3. Drain lubricant from the transmission box and fill it with new lubricant.
4. Apply anti-corrosion oil on unpainted part of the non-aluminum-alloy surface.
5. Keep the product in a well ventilated, dry and safe indoor place.
6. Properly keep the tools, quality certificate and operation manual attached to the machine.
7.5.
TRANSPORT
A forklift truck should be used to move the machine. The forks should be opened as far as possible and
inserted into the pallet. The weight of the machine is given on the Manufacturer's data plate together with
the other technical information.
Motor-hoe can be transported to given place by means of transport wheel (Fig 1 part. 3).
Switch off the engine before transporting the machine
EN
After 8 hours of
Every
work under a
day
half load
√
√
(First time)
√
√
√
√
√
After the first
After the third
month or after
month or after
20 hours
150 hours
√(third time and
(Second time)
thereafter)
Every year or
Every 2 years
1,000 hours
or 2,000 hours
√
17
Werbung
Inhaltsverzeichnis
