Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Receiver update
Duplex REX receivers can be updated
by the JETI USB adapter and the JETI
Studio program. JETI Studio is free to
download from the manufacturer's
website www.jetimodel.com
Update procedure:
1.
Install the JETI Studio program on the PC and start it.
2.
Connect the USB adapter to the PC. In the lower right corner of
the JETI Studio screen, select the correct COM port. On the USB
adapter, the green LED (power) lights up and the red LED
(communication) starts flashing.
3.
In JETI Studio, select the "Tools/Device Update" item.
4.
Connect the cable from the USB adapter to the receiver (Ext.
input).
5.
Select the update version and confirm "Update".
Note: device updates are free and important. Your devices may
get new functions, higher performance and higher stability
through updates. Always make sure your device has the latest
software.
COMPLEX RADIO CONTROL SYSTEM
USB adapter
34
EN
Werbung
Inhaltsverzeichnis
