General Settings; Receiver Setup (Rsat 900/Ng); Main Settings - Duplex REX Bedienungsanleitung

EN
COMPLEX RADIO CONTROL SYSTEM
5
Receivers settings RSAT 900 and 900NG
DUPLEX RSAT 900 and 900NG satellite receivers are designed for
operation with DUPLEX transmitters in the 900MHz band. This
band is intended primarily as a backup system in case of failure of
the main system in the 2.4GHz band. This significantly increases the
stability of data transmission and safety of the model.
RSAT 900 and RSAT 900NG receivers are not compatible. The
RSAT 900NG receiver is compatible with DUPLEX DS 12, DUPLEX
DC/DS 16II and DUPLEX DC/DS 24II. The RSAT 900 satellite
receiver is intended only for the first generation of DC/DS 24
transmitters. The settings and connections of both types are the
same.

5.1 General Settings

Output period - setting the output
period, see REX receivers (chapter
4.1.1). We recommend setting the
same value in all DUPLEX devices in
one model.
Low voltage alarm - setting the
threshold for alarm activation (power
supply)
32