Sagola PSAM104 Gebrauchsanleitung Seite 27

26/27
Name
Application
(swivel Sd V)
25 / 20
25 / 40
25 / 60
25 / 80
27 / 20
Dense materials,
27 / 60
Corrosion
27 / 80
protection,
31 / 40
Putty
31 / 60
31 / 80
35 / 20
35 / 40
35 / 60
The fan size is indicative and will vary depending on the viscosity and the pressure at which we spray. Other
steps and angles available. Consult.
9.2. Fixed airless tips
These tips are defined by the product orifice and the spray width.
Choose the right tip size and spray width in ac-cordance with the
product to be sprayed and working surface. Each tip size defines
a specific size and spray width.
The table below serves as a guide for the flows generated by fixed caps at certain pressures. It
also provides details of the spray width developed by these tips at a distance of 30 centimetres
from the surface on which it is to be supplied.
The spray width obtained is based on paint with a viscosity of 20 seconds in FORD CUP No. 4,
at a pressure of 112 Kg/cm
Name
Application
(fixed)
09 / 20
Enamels and
Acrylic paints 09 / 40
and Synthetics, oils,
09 / 60
DismoldING,
11 / 40
Resin-based
synthetic paints,
11 / 60
PVC paints
13 / 20
13 / 40
13 / 60
13 / 80
Enamels,
15 / 20
Plastic paints,
Primers, Fillers
15 / 40
15 / 50
15 / 60
15 / 80
17 / 100
Anti-corrosion
18 / 40
paint,
18 / 60
Plastic paints
18 / 80
Primers
18 / 90
Fire protection
21 / 40
The fan size is indicative and will vary depending on the viscosity and the pressure at which we spray. Other
steps and angles available. Consult.
Nozzle Tip
Angle
(inches/mm.)
0.025"/0.63 20°
0.025"/0.63 40°
0.025"/0.63 60°
0.025"/0.63 80°
0.027"/0.68 20°
0.027"/0.68 60°
0.027"/0.68 80°
0.031"/0.78 40°
0.031"/0.78 60°
0.031"/0.78 80°
0.035"/0.89 20°
0.035"/0.89 40°
0.035"/0.89 60°
.
2
Nozzle Tip
Angle
(inches/mm.)
0.009"/0.23 20°
0.009"/0.23 40°
0.009"/0.23 60°
0.011"/0.28 40°
0.011"/0.28 60°
0.013"/0.33 20°
0.013"/0.33 40°
0.013"/0.33 60°
0.013"/0.33 80°
0.015"/0.38 20°
0.015"/0.38 40°
0.015"/0.38 50°
0.015"/0.38 60°
0.015"/0.38 80°
0.017"/0.43 100°
0.018"/0.46 40°
0.018"/0.46 60°
0.018"/0.46 80°
0.018"/0.46 90°
0.021"/0.53 40°
ENGLISH
Spray width Water flow
at 30 cm. a 100 bar
100-150 mm. (4-6")
200-250 mm. (8-10")
2.13 L/min.
300-355 mm. (12-14")
405-457 mm. (16-18")
100-150 mm. (4-6")
200-250 mm. (8-10") 2.50 L/min.
300-355 mm. (12-14")
200-250 mm. (8-10")
300-355 mm. (12-14") 3.42 L/min.
405-457 mm. (16-18")
100-150 mm. (4-6")
200-250 mm. (8-10") 4.30 L/min.
300-355 mm. (12-14")
Spray width Water flow
at 30 cm. a 100 bar
100-150 mm. (4-6")
0.25 L/min.
200-250 mm. (8-10")
300-355 mm. (12-14")
200-250 mm. (8-10")
0.37 L/min.
300-355 mm. (12-14")
100-150 mm. (4-6")
200-250 mm. (8-10")
0.57 L/min.
300-355 mm. (12-14")
405-457 mm. (16-18")
100-150 mm. (4-6")
200-250 mm. (8-10")
250-300 mm. (10-12") 0.72 L/min.
300-355 mm. (12-14")
405-457 mm. (16-18")
508-558 mm. (20-22") 0.98 L/min.
200-250 mm. (8-10")
300-355 mm. (12-14")
1.10 L/min.
405-457 mm. (16-18")
457-508 mm. (18-20")
200-250 mm. (8-10") 1.52 L/min.
Gun filter
WHITE
WHITE
WHITE
WHITE
Gun filter
RED
RED
RED
YELLOW
YELLOW
WHITE