Siemens SIMATIC S7-400 Produktinformation Seite 8

Note
The FM 453 Positioning Module is intended for use in industrial areas. If used in residential areas, it may interfere with
radio/TV reception.
CE approval
Introduction
The FM 453 Positioning Module fulfills the requirements and protective aims of the following EC directives and conforms with
the harmonized European standards (EN) that have been published for programmable logic controllers in the Official Journals
of the European Community:
• Low-Voltage Directive
• EMC Directive
• Explosion Protection Directive
The EC Declaration of Conformity can be downloaded from the Internet
(https://support.industry.siemens.com/cs/document/16693331).
Low-Voltage Directive
2014/35/EU "Electrical Equipment Designed for Use within Certain Voltage Limits" (Low-Voltage Directive)
The FM 453 Positioning Modules are tested according to the requirements of EN 61131-2, which fall under the Low-Voltage
Directive.
EMC Directive
2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
Use in industry
SIMATIC products are designed for industrial applications.
Area of application Interference requirements
Industry EN 61000-6-4 + A1
Adhere to the installation guidelines
SIMATIC products meet the requirements if you comply with the installation guidelines described in the manuals during
installation and operation.
UKCA approval
DEKRA 21UKEX0018 X
Importer UK:
Siemens plc
Manchester M20 2UR
cULus approval
Underwriters Laboratories Inc. in accordance with:
8
Immunity requirements
EN 61000-6-2
Additions to the FM 453 Positioning Module for servo or stepper drive
A5E51987917-AB, 03/2023