Explanation Of Symbols; General Notices; General Safety Notices - Scheppach Plana 3.1c Originalbetriebsanleitung

Wear ear protection.
Wear a dust mask.
Wear eye protection.
• After unpacking, check all parts for possible
transportation damages. In the event of
complaints, inform the supplier immediately.
Any complaints made after this time will not
be accepted.
• The shipment is to be checked for complete-
ness upon receipt.
• Read through the manual carefully in order
to make yourself familiar in dealing with the
device before using it for the first time.
• Only use original equipment regarding
accessories, as well as consumable items
and spare parts. Spare parts can be ob-
tained from your specialized dealer. When
ordering, please specify our part numbers,
as well as type and construction year of the
GB
device.
NOTE:
According to the applicable product liability
laws, the manufacturer of the device does not
assume liability for damages to the product or
damages caused by the product that occurs
WARNING! When using electric tools,
basic safety precautions should always be
followed to reduce the risk of fire, electric
shock and personal
injury, in-cluding the following. Read all
these instructions before attempting to
operate this product and safe these inst-
ructions.
1. Keep work area clean
- Cluttered areas and benches invite
injuries.
- Make sure that the power cord does not
impede work and cause people to trip
2. Consider work area environment
- Don't expose power tools to rain. Don't
use power tools in damp or wet locations.
Keep work area well lit. Don't use power
tools in presence of flammable liquids or
gases.
3. Guard against electric shock
- Prevent body contact with grounded
surfaces (e.g. pipes, radiators, ranges
refrigeratiors).
4. Keep children away

Explanation of symbols

Read through the manual
carefully before you work
on the power tool.
We have marked the
m
points in this manual that
concern your safety with
this sign.

General notices

due to:
• Improper handling,
• Non-compliance of the operating instruc-
tions,
• Repairs by third parties, not by authorized
service technicians,
• Installation and replacement of non-original
spare parts,
• Application other than specified,
• A breakdown of the electrical system that
occurs due to the non-compliance of the
electric regulations and VDE regulations
0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the
operating instructions before installing and
commissioning the device. The operating
instructions are intended to help the user to
become familiar with the machine and take
advantage of its application possibilities in
accordance with the recommendations. The
operating instructions contain important infor-
General safety notices m
- Do not let visitors contact tool or extension
cord. All visitors should be kept away from
work area.
5. Store idle tools
- When not is use, tools should be stored
in dry, high, or locked-up place, out of the
reach of children.
6. Don't force tool
- It will do the job better and safer at the rate
for which it was intended.
7. Use right tool
- Don't force small tools or attachments to
do the job of heavy duty tool. Don't use
tools for purposes not intended: for ex-
ample, don't use circular saw for cutt- ing
tree limbs or logs.
8. Dress properly
- Do not wear loose clothing or jewelry.
They can be caught in moving parts. Wear
protective nair covering to contain long
hair.
- Do not wear gloves while operating this
machine
16
mation on how to operate the machine safely,
professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and
how to increase reliability and service life of
the machine.
In addition to the safety regulations in the
operating instructions, you have to meet the
applicable regulations that apply for the ope-
ration of the machine in your country. Keep
the operating instructions package with the
machine at all times and store it in a plastic
cover to protect it from dirt and moisture.
Read the instruction manual each time before
operating the machine and carefully follow
its information. The machine can only be
operated by persons who were instructed
concerning the operation of the machine
and who are informed about the associated
dangers. The minimum age requirement must
be complied with.
We have marked the points in this manual
that concern your safety with this sign
9. Use safety glasses
- Also use face or dust mask if cutting
operation is dusty.
10. Don't abuse cord
- Never carry tool by cord or yank it to
disconnect it from receptacle. Keep cord
from heat, oil and sharp edges.
11. Secure work
- Use clamps or a vise to hold work. It's
safer than using your hand and it frees
both hands to operate tool.
12. Don't overreach
- Keep proper footing and balance at all
times.
13. Maintain tools with care
- Keep tools sharp and clean for better and
safer performance. Follow instructions
for lubricating and changing accessories.
Inspect tool cords periodically and, if
damaged, have repaired by authorized
service facility. Inspect extension cords
periodically and replace if damaged.
m