Herunterladen Inhalt Inhalt Diese Seite drucken

Kinderkraft NUBI2 Bedienungsanleitung Seite 19

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
• Do not hang any bags on the parent handle.
• Any additional load, hanging on the handles of the stroller and/or behind the backrest and/or on the sides of the stroller,
causes deterioration of its stability.
• Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
• Lift the front suspension when going up a curb or step.
• Do not place the product near open flame or other heat sources.
• Do not use with an additional platform.
• Stop using the baby carriage if you have any doubts concerning its usage or suspect any danger.
I. STROLLER'S ELEMENTS (PICPIC. 1)
1. Hood
2. Seat with a safety harness(3)
4. Bumper bar
5. Footrest
6. Bumper
7. Front wheels
8. Parent handle
9. Cover/Harness pads
10. Rear wheels
III. ASSEMBLY OF STROLLERR'S FRAME
Place the frame on a flat surface with the handle directed upwards (PIC. A). To unfold the stroller, begin by pressing the
parent handle to the stroller's frame to make all elements strictly adhere to each other, and then press the lock button
located on a handle (PIC. B.I), simultaneously pressing the fold button (PIC. B.II) and lift the frame up according to the
arrows on the picture (PIC. C), until hearing a lock sound (PIC. D). Slide in the rear wheels (10) into the designated slots
until you hear a lock sound (PIC. E). Slide in the front wheels (7) into the designated slots until you hear a lock sound (PIC.
F).
IV. ASSEMBLY /DISASSEMBLY OF THE BUMPER BAR, HOOD ADJUSTMENT, CUP HOLDER, MOSQUITO NET
Insert the bumper bar into the appropriate slot in the frame (PIC. G). To disassemble, press the buttons and remove the
bumper bar (PIC. H). To adjust the hood and unfold another fabric layer, unzip the zipper located on the hood. Attaching
the stroller's fabric layer located on the backrest is possible. To do this, put a loop on the clasp located on the hood.
The cup holder (15) can be attached to the right or left side of the stroller on its stem (PIC. I).
The mosquito net is hidden in the footrest, unzip the zipper under the footrest, put on, and secure by putting the buttons
through the loops (PIC.J).
V. USING THE BRAKE
The stroller is equipped with a foot-operated parking brake located on the rear axis. Press down the lower part of the
brake, the brake will be activated after hearing the lock sound (PIC. K). To unlock, lift the lower part of the brake upwards
(PIC. L).
VI. ADJUSTMENT OF A BACKREST, FOOTREST
The seat has a smooth regulation from lie-flat to the sitting position (PIC. M), by using the buckle (PIC. N). The footrest has
2 adjustment levels. Pull the levers located on the bottom of the footrest (PIC. O) to change its position (PIC. P).
VII. SAFETY HARNESS
This stroller's safety harness is suitable for newborns. Make sure you always use the fastening system. To secure the child,
first place the shoulder strap's buckle part on the hip belt buckle part and slide them into the central buckle until it locks
(PIC. Q. I). Press the buckle to unfasten the harness (PIC. Q.II). Adjust the straps each time.
VIII. FOLDING THE STROLLER
Hold the handle and press the lock button (PIC. R.I) and fold button (PIC. R.II) and push downwards at the same time (PIC.
S).
After folding, the stroller is locked automatically, as shown on (PIC. T).
IX. CARE AND MAINTENANCE The buyer is responsible for proper installation of all functional elements as well as for
carrying out all required maintenance and adjustments in order to keep the buggy in good technical condition. The buggy
must be periodically checked for potential problems. Significant measures to be applied to ensure the child's safety and
prevent shortening of the product life have been presented below:
• Check the strength and safety of all rivets and connections.
• Check all wheel locking equipment and tyres. If necessary, replace or repair.
• Check if all safety devices work properly, particularly the main and additional fasteners that should move freely at any
time.
I. STROLLER'S ELEMENTS (PIC. 2)
11. Lock button
12. Backrest adjustment lever
13. Basket
14. Brake
15. Cup
16. Mosquito net
17. Fold button
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis