Strong SRT 32HC2003 Bedienungsanleitung Seite 73

Problem
No Signal
The picture and sound
remain frozen, or macro
blocks or similar distortion
are visible on the screen.
Any other reception or
signal related problems
No colour
No picture, normal sound
18
Possible cause and solution
1. The TV is not connected to a signal source (DVB-C,
DVB-S/S2 or DVB-T/T2) or the antenna (terrestrial
or satellite antenna) is maybe not aligned correctly
respectively the according connection and distribution
equipment might show malfunction, incompatibility or
defectives.
2. DVB-T/T2: Active antennas need antenna power switched
ON or external power connected.
Antenna is maybe out of digital signal reception in your area.
Check reference from service providers about coverage.
3. DVB-S/S2: Incorrect values of some tuner parameters
(e.g. one or some channel(s) changed to another
transponder or are no longer emitted).
Incorrect values of LNB parameters.
DVB-S/S2,DVB-T/T2: The reception signal is too weak or
disturbed by electromagnetic, high-frequency, or other
interference signals. DVB-T/T2 : Disturbances caused by signal
reflections.
DVB-C, DVB-S/S2: The connection cables at the signal source are
too long (too high attenuation).
DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got
misaligned after storm etc.
1. Generally cables might have loosened. Moisture might
have entered into cables or connectors.There is heavy
rain or heavy storm at present (DVB-S/S2 and -T/T2).
Check the cable connections. DVB-S/S2 and -T/T2: Check
all equipment connected between the reception point
and the TV.
2. Wait until heavy rain/thunderstorm passed. If no solution
ask a local satellite specialist for advice.
DVB-S/S2: The satellite dish is NOT aligned to the (correct)
satellite(s). Ask a local satellite specialist for advice.
3. DVB-S/S2: Satellite dish is too small. Trees or buildings
are in path. Ask a local satellite specialist for advice.
4. DVB-S/S2: Signal is too strong, maybe need to be
atennuated. Ask a local satellite specialist for advice.
1. Devices are not properly connected (scart, RCA sockets)
or wrong/bad cables are used.
2. Adjust the saturation.
3. Switch TV on another channel. It is possible that the
current programme is broadcast in black and white.
1. Adjust the brightness and contrast
2. Radio channel is tuned to or the programme is not
transmitting Video signals or another broadcasing
interference/failure.
www.strong.tv