Herunterladen Inhalt Inhalt Diese Seite drucken

Dvb-T/T2 Installation; Dvb-C Installation; Electronic Programme Guide (Epg) - Strong SRT 32HC2003 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 30
Channel type
Service Type
It is recommended to use the default settings.

3.2 DVB-T/T2 installation

Terrestrial Setting
Press ENTER to start directly searching for digital channels.
Optional you can search also for analogue channels.
Press p and select the Tune Type.
By pressing t u select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to
search analogue broadcasts).

3.3 DVB-C installation

Cable Setting
Press pq t u to highlight your settings.
Scan type
Network ID
Frequency
Symbol Rate
Optional you can search also for analogue channels.
Press p select the Tune Type.
By pressing t u select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to
search analogue broadcasts).
NOTE:
Press ENTER to start searching for digital channels.

4.0 ELECTRONIC PROGRAMME GUIDE (EPG)

EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers
and offers information on broadcasted programmes. You can access it in digital mode by
pressing EPG on the remote control. Press EPG to bring up the EPG interface. Use pq to select
a channel.
8
Select Free to search Free-To-Air channels only Free + Scrambled to
search FTA and Encrypted channels or Scramble to search Encrypted
channels only.
Select All to search DTV channels and Radio. Select RADIO to search
radio channels only or DTV for only Digital TV channels.
You can select Network Scan, Blind scan or Full.
The default setting is Auto. To enter your own value press t u and
enter (with 0 ~ 9) the used Network ID from your provider.
The default setting is Auto. To enter your own value press t u and
enter (with 0 ~ 9) the main frequency used by your provider in KHz.
The default setting is Auto. To enter your own value press t u and
enter (with 0 ~ 9) the used Symbol Rate from your provider. (Ks/s) most
used values are 6900 or 6875.
Please, check the settings for your cable system used by your
provider! Full scan will have a duration of approximately 20 minutes,
depending on your cable network.
www.strong.tv

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis