Setup Menu - Strong SRT 32HC2003 Bedienungsanleitung

Default Prog
Default Volume
Max Volume
Import Database
Export Database
Clear Lock
NOTE:

5.7 Setup Menu

Language
TXT Languages
Audio Languages
Subtitle Language
Hearing Impaired
Aspect Ratio
Blue Screen
First Time Installation
Reset Restore Factory Default
Software Update (USB) If a new software release for this model is available on our website
www.strong.tv
select one of them by pressing ENTER. Press MENU to back to the
previous menu.
Here it is possible to select the channel that will be displayed when
the TV is turned on. The program are available only when the source
selected in Default Source contain channels and it is selected in view
mode. Use t u to set a channel of your choice.
This option allows to set the default volume when the TV is turned on.
Press ENTER to display the volume bar, use t u to adjust the volume.
Press MENU to back to the previous menu.
To set the Max volume press ENTER to display the volume bar, use t u
to adjust the volume. Press MENU to back to the previous menu.
Press ENTER to Import the Database from a compatible TV.
Press ENTER to Export the Database to a compatible TV.
Press ENTER to reset all functions set in this menu.
For the Import Database and Export Database functions you need to
connect a USB device formatted in FAT32.
Select the Menu language of your choice. The default setting is English.
Press pq to select the menu language.
Press pq t u to select correct character type belong to language to
display correct the TXT. Selection are: West, East, Russian, Arabic or
Farsi.
Press t u to select Primary for main audio track or Secondary next
audio channel if first is not available. Press pq t u to select your
chosen Audio Language, then press ENTER.
Press pq t u to select your chosen Subtitle Language, then
pressENTER to select.
If you like to have extra subtitles support then select this function to
On.
Change in this option the picture format from displayed video on the
screen. PressENTER to select. Auto, 16:9, 4:3, Zoom 1, Zoom 2.
If you select a input with no signal and like to have Blue colour screen
instead black. Select this function to On.
This option allows you to perform the First Installation again. The
complete description is available on chapter 3.
Press pq to select this function, by pressing ENTER. You will reset
all the settings contained in the main menu and deleted all installed
channels. TV will go back to First Time Installation. See chapter 3.
and you have copied the unzipped file to an empty USB device,
formatted in FAT32, you can upgrade the system software of this TV.
13