Menu Settings; Menu Control (Dtv Mode); Channel - Strong SRT 32HC2003 Bedienungsanleitung

Press u to switch to overview from one channel EPG. Use DOWN/UP to select event where you
like to know more details. These details are displayed on top of this EPG banner or press INFO
button for full screen. Press EXIT to stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN Set a reminded to event or set even Timer function.
YELLOW
Overview of previous day
BLUE Overview of next day

5.0 MENU SETTINGS

Below items depend if they are available of select input source. Use SOURCE to select other
source. Selections are Satellite, DTV, ATV, AV, PC, SCART, Component, HDMI and Media.

5.1 Menu control (DTV mode)

Press MENU to enter the main menu. Press t u to select an item. Press pq and ENTER to
select the submenus. Press MENU to exit the item.

5.2 Channel

Press MENU to display the main menu. Press t u to select Channel in the main menu. Press
pq to select the option you wish to adjust in the Channel menu.
Press ENTER to adjust. After finish your adjustment, press MENU to save and return to the
previous menu. Below items depend if they are available of select input source. Use SOURCE to
select other source.
5.2.1 Auto Tuning
Press pq to select Auto Tuning. If the TV use DVB-T or DVB-C tuner please refer to chapters 3.2
and 3.3; for Satellite (DVB-S) tuner please refer to chapter 3.1.
5.2.2 Dish Setup
If you use Satellite as input source, the Dish Setup menu allow you to set you satellite and
belonging settings as DiSEqC port and LNB type. Afterwards you may start the Auto Tuning or
Manual Tuning by selecting with EPG button the wanted transponder.
5.2.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press pq to select DTV Manual Tuning. Then press
ENTER to enter the sub-menu.
Press t u to select a Channel No., and then press ENTER to start the search. The search stops
when a programme is found and this programme will be stored in the current channel position.
Press MENU to exit.
5.2.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and
press ENTER to access. Highlight and press pq to select Storage To 1 (maybe other number),
Sound System and Channel No.. Then select search and press ENTER to start the search. Press u
for the unit to search towards higher frequency. Press t for the unit to search towards lower
www.strong.tv
9