English (Original Instructions); Technical Data - DeWalt XR DCH263 Bersetzung Der Originalbetriebsanleitung

EnGLIsH
HEAVY-DUTY CORDLESS ROTARY HAMMERDRILL
DCH263
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
No-load Impact rate
Single impact energy (EPTA 05/2009)
Maximum drilling range in steel/wood/concrete
Maximum core drilling capacity in soft brick
Chuck
Collar diameter
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-6:
Hammerdrill mode
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN IEC 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
28
WALT one of the
e
DCH263
V
DC
min -1 0–1165
bpm 0–4300
J
mm 13/30/28
mm
SDS plus®
mm
kg
dB(A)
dB(A)
dB(A)
= m/s²
m/s²
= m/s²
m/s²
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
18
Rotary Hammerdrill
1
DCH263
Li-Ion
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015 + A11:2022, EN IEC 62841-2-
6:2020 + A11:2020.
3.0
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
65
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
54
file and makes this declaration on behalf of D
2.7
Markus Rompel
93
Vice-President Engineering, PTE-Europa
101
D WALT, Richard-Klinger-Straße 11,
e
3 65510, Idstein, Germany
30.06.2022
DECLARATION OF CONFORMITY
10.5
THE SUPPLY OF MACHINERY (SAFETY)
1.5
10.2
1.5
D WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015 + A11:2022, EN IEC 62841-2-6:2020 + A11:2020.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
REGULATIONS 2008
Rotary Hammerdrill
DcH263
WALT at the following
e
WALT at
e
WALT.
e