Withings BPM Core Bedienungsanleitung Seite 5

How to take measurements
3 - For blood pressure measurement. Place your left arm on a
table with the cuff level with your heart and your palm facing
up. Make sure the cuff is not touching the left side of your
chest. Your arm should be resting comfortably on the table
without making any effort. Do not speak or move during the
measurement.
4 - For ECG and Heart Sounds recording:
The excess cuff should not overlap the stethoscope. For this
measurement, you should place the stethoscope in contact
with your chest, and the two electrodes inside the cuff should
be in contact with your skin. Make sure that the stethoscope
is in contact with your chest during the measurement. Do not
speak or move during the measurement. Breathe normally. You
do not need to put your left hand on a table.
3.
4.
Standard mode
1- Two measurements in a
row will be taken during
this mode. The first one is a
blood pressure measure-
ment, which you should take
in the position described on
page 5.
The second is a combined
measurement of an ECG and
Heart Sounds recording via
the stethoscope.
5.
5
EN
FR
DE
SV
NL
FI
DA
IT
ES
CS
PL
PT
RO
HU
SK
ET
EL
IS
LV
LT
SL
TR
BG
HR