Withings BPM Core Bedienungsanleitung Seite 13

RF Statement
Guidance and manufacturer's declaration — electromagnetic emissions
This smart blood pressure monitor with ECG & digital stethoscope is intended for use
in the electromagnetic environment specified below. The customer or the user of the
smart blood pressure monitor with ECG & digital stethoscope should ensure that it is
used in such an environment.
Emissions test Compliance
CE emissions
Group 1
CISPR11
RE emissions
Class B
CISPR11
Harmonic emissions
Not applicable
IEC 61000-3-2
Voltage fluctuations/
Flicker emissions Not applicable
IEC 61000-3-3
Electromagnetic environment —
guidance
This smart blood pressure monitor
with ECG & digital stethoscope uses
RF energy only for its internal function.
Therefore, its RF emissions are very low
and are not likely to cause any interfer-
ence in nearby electronic equipment.
This smart blood pressure monitor
with ECG & digital stethoscope is
suitable for use in all establishments,
including domestic establishments and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
Declaration – Electromagnetic
emissions and immunity
For equipment and systems that are not life-supporting and are specified for use only
in a shielded location.
Smart blood pressure monitor with ECG & digital stethoscope declaration of
electromagnetic immunity
This smart blood pressure monitor with ECG & digital stethoscope is intended for use
in the electromagnetic environment specified below. The customer or the user of the
smart blood pressure monitor with ECG & digital stethoscope should ensure that it is
used in such an environment.
Immunity test IEC 60601 test level Compliance
level
Conducted 3 Vrms N/A
RFIEC 61000-4- 150 kHz to 80 MHz
Radiated RF IEC 3 V/m N/A
61000-4-3 80 MHz to 2.5 GHz
13
EN
FR
DE
SV
NL
FI
DA
IT
Electromagnetic
ES
environment – guidance
CS
N/A PL
PT
RO
Portable and mobile RF
HU
communications equipment
SK
should be used no closer to
any part of the equipment
ET
or system, including cables,
EL
than the recommended se-
paration distance calculated
IS
from the equation appli-
LV
cable to the frequency of
LT
the transmitter. Interference
may occur in the vicinity of
SL
equipment marked with the
TR
following symbol .
BG
HR