Cameo X3 D Bedienungsanleitung Seite 9

CAUTION:
1. Moving components such as mounting brackets or other movable components may
become jammed.
2. In the case of devices with motor-driven components, there is a risk of injury due
to the movement of the device. Sudden device movement can cause shockreac-
tions.
3. The housing surface of the device can become very hot during regular operation.
Ensure that accidental touching of the housing is not possible. Always allow the
lamp to cool sufficiently before removal, maintenance work and charging etc.
ATTENTION:
1. Do not install or use the device in the vicinity of radiators, accumulators, stoves, or
other heat sources. Ensure that the device is always installed in such a way that it
is sufficiently cooled and cannot overheat.
2. Do not place any ignition sources, such as burning candles, near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. For transport, use the original packaging or packaging provided by the manufactu-
rer.
5. Avoid any impacts to or shaking of the device.
6. Observe the IP rating and the ambient conditions such as temperature and humidi-
ty according to the specifications.
7 Devices can be continuously further developed. In the event of deviating information
on operating conditions, performance or other device properties between the user
manual and the device labelling, the information on the device always takes priority.
8. The device is not suitable for tropical climate zones or for operation over 2,000 m
above sea level.
9 Unless explicitly stated, the device is not suitable for operation under marine condi-
tions.
PLEASE NOTE:
For conversion or retrofit sets or accessories provided by the manufacturer, it is
essential to observe the instructions included.
9