Cameo X3 D Bedienungsanleitung Seite 18

Dimmer = Dimmer response
response
PWM Fre- = LED PWM frequency 650Hz,
quency
Fan = Fan control
Calibration = Calibration of the
Factory = Reset to factory
Reset
Service = Resetting the Ser-
Timer Reset
SYSTEM INFORMATION (System Info)
Starting from the main display, press the encoder to enter the main menu. Select the System Info
menu item and confirm the selection.
This will take you to the submenu for accessing the system information (see table):
18
Daylight LEDs
settings
vice Timer
Halogen Light behaves like a halogen spotlight
with slight brightness changes
Select LED PWM frequency
1530Hz,
3600Hz,
12000Hz,
18900Hz,
25000Hz
Car Automatic fan speed control
Off Deactivated fan with greatly reduced
brightness
Constant Constant high fan speed
High
Constant Constant average fan speed with reduced
Medium brightness, if necessary
Constant Constantly low fan speed with reduced
Low brightness, if necessary
LED Individual calibration of the Daylight LEDs
to match the brightness to other head-
lights. Cross-mode brightness setting with
values from 000-255
Reset Reset with Yes, cancel with No
Now?
Yes / No
Reset Reset with Yes, cancel with No
Now?
Yes / No