Cameo X3 D Bedienungsanleitung Seite 15

CONFIGURING DMX MODE (DMX Mode)
Starting from the main display, press the encoder to enter the main menu. Now select the menu
item DMX Mode and confirm. Select the desired DMX operating mode and confirm the selection.
Tables with the channel assignments can be found in these instructions under DMX CONTROL.
STATIC STANDALONE MODE
The stand-alone operating mode Static makes it possible to set the dimmer and strobe directly
on the unit, similar to using a DMX control unit. In this way, an individual scene can be created
without an additional DMX controller.
Starting from the main display, press the encoder to enter the main menu. Now select the Stand
Alone menu item, confirm, then select Static and confirm again. Now select the menu item you
wish to edit and confirm. Set the desired value and confirm the entry. The values for the strobe
effect correspond to the values in channel 3 of the DMX table 4 CH 16 bit.
AUTO STANDALONE MODE
Adjust brightness (dimmer), speed (speed) and fade time (fade) as desired.
Starting from the main display, press the encoder to enter the main menu. Now select the Stand
Alone menu item, confirm, then select Auto and confirm again. Now select the menu item you
wish to edit and confirm. Set the desired value and confirm the entry.
15