Bluetooth; Message Codes - CONDTROL XP3 GREEN Bedienungsanleitung

LASER DISTANCE METER
EN

Bluetooth

Press

MESSAGE CODES

While operation, the following codes/symbols may appear on the display:
Message Cause
ERR Out of measuring range
ERR 1 Laser signal is too weak
ERR 2 Laser signal is too strong
ERR 3 Low battery voltage.
The ambient temperature is
ERR 4
out of the working range.
Measuring error in
ERR 5
Pythagoras function.
ERR 6 Failure of tilt sensor.
22 22
XP3 GREEN CONDTROL
Activate Bluetooth function.
Symbol appears on the display. Switch on
Bluetooth in your phone, tablet PC or laptop. For
further operation please use application Smart
Measure CONDTROL.
Solution
Use the device within the range.
Use the reflecting plate.
Use the reflecting plate.
Сharge or replace the batteries.
Use the device in the specified
temperature.
Measure again and ensure
that hypotenuse is bigger than
cathetus.
Please contact service center.
User manual