LASER DISTANCE METER
EN
Point-to-point measurement
Long press
for 1 sec.
Press
Press
18
18
XP3 GREEN CONDTROL
Symbol
Laser beam is on. Line
First measurement (distance to point 1)
Second measurement (distance to point 2)
– distance to point 1 (measured)
– distance to point 2 (measured)
– distance between points 1 and 2 (calculated)
Note: Make sure that the starting point of the
measurement (for example, the bottom end of the
device) is the same in both measurements.
appears on the display.
is flashing.
User manual