LASER DISTANCE METER
EN
Continuous measurement (tracking)
Press and hold
for 1 sec.
Press
Press
or
or
Stake out
Press
and hold for 2 sec.
Press
and
Press
Press
or
Press
XP3 GREEN CONDTROL
Activate
continuous
function. Laser beam is switched on simultaneously.
– tilt angle value
– maximal value
– minimal value
– current value
Stop continuous measurement.
The last measured values are shown on the display.
Activate stake out function.
Symbol
appears on the display.
Set the value of distance А*.
Confirm the value of distance A.
Set the value of distance В*.
Confirm the value of distance B. Start taking
measurements. Laser beam is flashing. Move the
product slowly along the stake-out line.
Arrows
and
direction it is required to move the product in order to
reach stake-out point.
measurement
on the display indicate in what
User manual
(tracking)
11
11