Schartec P190 Anleitung Seite 30

LED Display Definition
FC Photocell 1 function
FD Photocell 2 function
FE Buzzer function
FF Latch release
function (electric lock)
Open/Stop/
FG
Close/Stop
function key
FH Pedestrian
Mode function
key
FI Reverse option
when closing
FJ Reverse option
when opening
FK Functions of D
Key terminal
FL Functions of S
Key terminal
Parameter
FC-0 Function OFF
FC-1 Function ON
FD-0 Function OFF
FD-1 Function ON
FE-0 Function OFF
FE-1 Function ON
Function OFF
FF-0
Function ON
FF-1
FG-1 A Key
FG-2 B Key
FG-3 C Key
FG-4 D Key
FH-0 Function OFF
FH-1 A Key
FH-2 B Key
FH-3 C Key
FH-4 D Key
When in Motor type setting F1-3 (factory setting):
FI-1
Reverse 2 seconds when not detecting hall sensor or over-current
occurs before reaching closing position.
When in Motor type setting F1-1 (not factory setting): Reverse
2 seconds within 80% of total stroke.
FI-2 When in Motor type setting F1-3 (factory setting):
Reverse 4 seconds when not detecting hall sensor or over-current
occurs before reaching closing position.
When in Motor type setting F1-1 (not factory setting):
Reverse to the end within 80% of total stroke.
When in Motor type setting F1-3 (factory setting):
FI-3
Reverse to end when not detecting hall sensor or over-current
occurs before reaching closing position.
When in Motor type setting F1-1 (not factory setting):
Reverse to the end within 90% of total stroke.
When in Motor type setting F1-3 (factory setting):
FJ-1
Reverse 2 seconds when not detecting hall sensor or over-current
occurs before reaching opening position.
When in Motor type setting F1-1 (not factory setting):
Reverse 2 seconds within 80% of total stroke.
FJ-2 When in Motor type setting F1-3 (factory setting):
Reverse 4 seconds when not detecting hall sensor or over-
current occurs before reaching opening position.
When in Motor type setting F1-1 (not factory setting):
Reverse to the end within 80% of total stroke.
When in Motor type setting F1-3 (factory setting):
FJ-3
Reverse to end when not detecting hall sensor or over-current
occurs before reaching opening position.
When in Motor type setting F1-1 (not factory setting):
Reverse to the end within 90% of total stroke.
FK/L-1 Double gates (Open/Stop/Close/Stop)
FK/L-2 Single gates (Open/Stop/Close/Stop)
FK/L-3
Pedestrian mode
Open
FK/L-4
FK/L-5 Stop
Close
FK/L-6
No Function
FK/L-7
Table
30
Description
1. The factory setting is "FC-1".
1. The factory setting is "FD-0".
1. The factory setting is "FE-0".
1. When function is active, gate
moves slightly forward to
unlock the lock.
2. The factory setting is "FF-0".
1. The factory setting is "FG-1".
1. The factory setting is "FH-2".
1. FI factory setting "FI-3".
1. FJ factory setting is "FJ-1".
1. FK factory setting "FK-1".
2. FL factory setting is "FL-2".