Safety-Related Information; General Safety Statements; Conventions In This Document; Meaning Of The Warning Notes - Dräger X-plore 8000 Protective Visor Gebrauchsanweisung

1

Safety-related information

Dräger X-plore ® 8000 Protective Visor
1.1

General safety statements

– Before using this product, carefully read these instructions for use and those
of the employed respiratory protective device.
– Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the intended use section of this document.
– Do not dispose of the instructions for use. Ensure that they are retained and
appropriately used by the product user.
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
product.
– Only trained and competent personnel are permitted to inspect, repair and
service the product.
– Use only genuine Dräger parts for maintenance work and repairs.
Otherwise, the proper functioning of the product may be impaired.
– Do not use a faulty or incomplete product. Do not modify the product.
– Notify Dräger in the event of any product or product component fault or
failure.
– Safety goggles designed to protect against particles moving at high speeds
can transmit impacts and thus become a hazard to the wearer when worn
over regular glasses.
2

Conventions in this document

2.1

Meaning of the warning notes

The following warning notes are used in this document to notify users of
possible dangers. The meanings of the warning notes are defined as follows:
Alert icon Signal word
WARNING
Instructions for use |
Dräger X-plore
Consequences in case of nonob-
servance
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
death or serious injury.
®
8000 Protective Visor
Alert icon Signal word
CAUTION
NOTICE
3 Description
3.1 Product overview
Illustration on the fold-out page (figure A)
1 Tube connection
2 Head cover
3 Quick adjustment system (for
head height)
4 Visor bracket
5 Fastening pins
6 Sweatband
A protective foil is available as an accessory. The protective foil is fitted to the
visor with the press studs and protects it against scratches, paint particles and
dust.
Safety-related information
Consequences in case of nonob-
servance
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
physical injury. It may also be used to
alert against unsafe practices.
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
damage to the product or environment.
7 Visor
8 Press studs
9 Face cuff
10 Loops
11 Adjusting screw
12 Adjusting wheel (for head circum-
ference)
| en
9