Safety-Related Information; Conventions In This Document; Product Overview - Dräger X-plore 8000 Protective Visor Gebrauchsanweisung

Safety-related information

1 Safety-related information
®
Dräger X-plore 8000 Protective Visor
1.1 General safety statements
– Before using this product, carefully read these instructions for use and those
of the employed respiratory protective device.
– Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the intended use section of this document.
– Do not dispose of the instructions for use. Ensure that they are retained and
appropriately used by the product user.
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
product.
– Only trained and competent personnel are permitted to inspect, repair and
service the product.
– Use only genuine Dräger parts for maintenance work and repairs.
Otherwise, the proper functioning of the product may be impaired.
– Do not use a faulty or incomplete product. Do not modify the product.
– Notify Dräger in the event of any component fault or failure.
2

Conventions in this document

2.1 Meaning of the warning notes
The following alert messages are used in this document to provide and highlight
areas of the associated text that require a greater awareness by the user. A
definition of the meaning of each alert message is as follows:
Alert icon Signal word
WARNING
Consequences in case of non-obser-
vance
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
death or serious injury.
Alert icon Signal word
CAUTION
NOTICE
3 Description
3.1

Product overview

Illustration on the fold-out page (figure A)
1 Tube connection
2 Head cover
3 Quick adjustment system (for
head height)
4 Visor bracket
5 Fastening pins
6 Sweatband
A protective foil is available as an accessory. The protective foil is fitted to the
visor with the press studs and protects it against scratches, paint particles and
dust.
Dräger X-plore
Consequences in case of non-obser-
vance
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
physical injury. It may also be used to
alert against unsafe practices.
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
damage to the product or environment.
7 Visor
8 Press studs
9 Face cuff
10 Loops
11 Adjusting screw
12 Adjusting wheel (for head circum-
ference)
®
8000 Protective Visor