Feature Description; Instructions For Use; Explanation Of Type-Identifying Marking And ® Symbols - Dräger X-plore 8000 Protective Visor Gebrauchsanweisung

en |
Description
3.2

Feature description

® 1)
The Dräger X-plore 8000 The protective visor serves as a facepiece for
respiratory protective devices. It makes the breathing air available that is fed
through the respiratory protective device.
The breathing air is supplied through a breathing hose on the back of the
protective visor. The breathing air flows through the air duct over the back of the
user's head to the front. The resulting overpressure prevents polluted ambient
air from penetrating.
3.3 Intended use
The protective visor is designed as a facepiece for use with the Dräger X-plore
8000 powered air purifying respirator and the Dräger X-plore
breathing apparatus. In the USA the Dräger X-plore
only permitted to be used with Dräger X-plore
respirators.
3.4 Limitations on use
The protective effect can be impaired by the following factors:
– High wind velocities and strong crosswind
– Earpieces or beards under the face cuff
3.5 Approvals
For information on the corresponding system approvals please refer to the
instructions for use of the respirators mentioned in 3.3 Intended use.
The protective visors fulfil the following regulations:
– (EU) 2016/425
– Regulation 2016/425 on personal protective equipment, as amended to
apply in GB
Declarations of conformity: see www.draeger.com/product-certificates
®
1) X-plore is a registered trademark of Dräger.
10
®
®
9300 air line
®
8000 protective visor is
®
8000 powered air purifying
The protective visors are approved in accordance with the following standards:
– EN 166:2001
– ANSI ISEA Z87.1-2010
®
In the USA the Dräger X-plore 8000 protective visor is approved in
combination with the Dräger X-plore
accordance with Part 84, Title 42 of the Code of Federal Regulations. It is only
permitted to be used together with components that have NIOSH approval (see
Approval Label of the Dräger X-plore 8000
3.6 Explanation of type-identifying marking and
symbols
3.6.1 Tag
X-plore 8000
Protective visor
5
Part-No.: R59900
1
EN 12941
with Dräger X-plore 8000
4
Date of manufacture: XX/2014
1 Approval marking
2 Manufacturer
3 "Follow instructions for use" sym-
bol

Instructions for use

|
Dräger X-plore
®
8000 powered air-purifying respirator in
®
blower unit).
1
2
Dräger Safety AG & Co. KGaA
23560 Lübeck, Germany
3
4 Date of manufacture (exam-
ple)
5 Part number
®
8000 Protective Visor