Herunterladen Inhalt Inhalt Diese Seite drucken

Care And Cleaning; Hints And Tips; Technical Specification - Candy CDH30 Gebrauchsanweisung Und Installation

Keramikkochfeld
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 260

Care and Cleaning

The settings below are guidelines only. The exact setting will depend on several factors, including your cookware and the
amount you are cooking. Experiment with the hob to find the settings that best suit you.
What?
How?
Everyday soiling on
1. Switch the power to the hob off.
glass (fingerprints,
2. Apply a cooktop cleaner while the glass is still
marks, stains left by
warm (but not hot!)
food or non-sugary
3. Rinse and wipe dry with a clean cloth or paper
spillovers on the
towel.
glass).
4. Switch the power to the cooktop back on.
Boilovers, melts, and
Remove these immediately with a fish slice, palette
hot sugary spills on
knife or razor blade scraper suitable for ceramic
the glass.
glass cooktops, but beware of hot cooking zone
surfaces:
1. Switch the power to the cooktop off at the wall.
2. Hold the blade or utensil at a 30° angle and scrape
the soiling or spill to a cool area of the cooktop.
3. Clean the soiling or spill up with a dish cloth or
paper towel.
4. Follow steps 2 to 4 for „Everyday soiling on glass‟
above.
Spillovers on the
1. Switch the power to the hob off.
touch controls.
2. Soak up the spill
3. Wipe the touch control area with a clean damp
sponge or cloth.
4. Wipe the area completely dry
with a paper towel.
5. Switch the power to the cooktop back on.

Hints and Tips

Problem
Possible causes
The cooktop cannot
No power.
be turned on.
The touch controls are
The controls are locked.
unresponsive.
The touch controls are
There may be a slight film of
difficult to operate.
water over the controls or you
may be using the tip of your
finger when touching the
controls.
The glass is being
Rough-edged cookware.
scratched.
Unsuitable, abrasive scourer or
cleaning products being used.
Some pans make
This may be caused by the
crackling or clicking
construction of your cookware
noises.
(layers of different metals
vibrating differently).

Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size
D×W×H(mm)
Building-in Dimensions A×B (mm)
Important!
• When the power to the hob is switched off, there will be no „hot
surface‟ indication but the cooking zone may still be hot! Take
extreme care.
• Heavy-duty scourers, some nylon scourers and harsh/abrasive
cleaning agents may scratch the glass. Always read the label to
check if your cleaner or scourer is suitable.
• Never leave cleaning residue on the cooktop: the glass may
become stained.
• Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
• The hob may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you wipe the touch control area dry
before turning the hob back on.
What to do
Make sure the cooktop is connected to the power supply and that
it is switched on.
Check whether there is a power outage in your home or area. If
you‟ve checked everything and the problem persists, call a
qualified technician.
Unlock the controls. See section
„Using your ceramic cooktop‟ for instructions.
Make sure the touch control area is dry and use the ball of your
finger when touching the controls.
Use cookware with flat and smooth bases. See „Choosing the right
cookware‟.
See „Care and cleaning‟.
This is normal for cookware and
does not indicate a fault.
CDH30
2 Zones
220-240V~
2700- 3
3 00 W
288X520X55
268X490
EN-10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis