M-DESIGN LUNA 1000 RD Montageanleitung Und Bedienungsanleitung Seite 13

YOU HAVE TO CONNECT AT LEAST THE TWO APPERTURES SITUATED AT THE TOP OF THE
APPLIANCE FOLLOWING PIC. 1
THE STOVE MAY NOT BE PLACED DIRECT ON THE STOVE MAY NOT BE PLACED DIRECT ON THE
FLOOR, WTHOUT THE FEETS. THIS TO ALLOW NATURAL CONVECTION. THE APPERTURES FOR
THE AIR SUPPLY ARE SITUATED UNDERNEATH THE APLLIANCE.
EVERY OPENING YOU MAKE MUST BE CONNECTED WITH A FLEXIBLE TUBE dia.150MM (see pic.
below). THIS WILL AVOID THE HEATING OF THE ELECTRONIC PART OF THEAPPLIANCE.
IN OTHER CASE YOU WILL HAVE ERRORCODE F02.
OUTLET CONVECTION
PIC.1
INLET CONVECTION
15
INSTRUCTION FOR INSTALLATION AND USE - LUNA 1000-1300 RD GOLD - GAS