Operation Of The Device; Charge Level - THERMODYNE UTILLIAN 8 Bedienungsanleitung

Operation of the Device

Recommendation before First Use
• Fully charge the battery before first use.
• Perform a sanitation cycle (pyrolysis) before first use. Heat up the device with
the highest power or temperature setting for a full cycle in order to purge any
machine oils from manufacturing.
Charging
To charge your UTILLIAN 8™, plug the included USB-C Charging Cable into the
USB-C Charging Port and plug the other end into a wall adapter or computer. The
LEDs of the Status Interface and the LEDs under the Glass Mouthpiece will pulse
in white according to the charge level to let you know the device is charging. When
the LEDs are all glowing solid white, the unit is fully charged. Remove the USB-C
Charging Cable and resume use.

Charge Level

Having plugged in the USB-C Charging Cable, the LEDs will pulse in white in order
to show that the device is charging. The charge level is indicated by the count of
LEDs of the Status Interface. The more charge the battery holds, the more of the 4
Interface LEDs are illuminated.
Operation of the Device EN
EN EN
9 9