THERMODYNE UTILLIAN 8 Bedienungsanleitung Seite 19

Changing the Temperature Level
Toggle between the 4 pre-set temperature levels by pushing the Power Button 1
time, while being switched on, starting from the most recent temperature level.
Every single push increases the temperature level by 1. The number of illuminated
LEDs of the Status Interface (Interface LEDs) displays the temperature level. The
color of the LEDs depends on the status,
• pulsing red in the heat-up status,
• solid green in ready-to-use status and
• pulsing green in the cool-down status.
Temperature level 1:
Emphasis on flavor facets of your material, vapor production is light.
Temperature level 2:
Combines a rich flavor with satisfying vapor production. Nuanced flavor is favored
over intense vapor production with this balanced temperature level.
Temperature level 3:
Combines a rich flavor with satisfying vapor production. Intense vapor production
is favored over nuanced flavor with this balanced temperature level.
Temperature level 4:
Emphasis on massive clouds with only faint flavor.
Operation of the Device EN
EN EN
19 19