THERMODYNE UTILLIAN 8 Bedienungsanleitung Seite 21

The Multi-Tool, combines the function-
ality of 2 components of other devices,
it serves as a filling tool and a carb cap.
Once put in place and having reached
the consumption temperature you can
enjoy your material. The unique Multi-
Tool, now serves as a carb cap. The
UTILLIAN 8™ has 2 holes with which
you can control airflow and thus the
density of the vapor. Holding the de-
vice in one hand, you can tune the flow
through the device with your index fin-
ger and thumb by either blocking the
holes or leaving them open. Alternating
between the holes will cause turbu-
lence, which mixes the vapor better
with the air, increasing the user expe-
rience.
Operation of the Device EN
EN EN
21 21