After Installation; Cleaning And Care - Blumfeldt 10041806 Bedienungsanleitung

EN
24
Option with valves

AFTER INSTALLATION

• Use a screwdriver to open the air vent. Open the valve and let the water
flow into the radiator.
• Check all connections for leaks.
• When the water comes out of the air vent, there is no more air in the pipe.
• Close the air vent with a screwdriver and turn the valve open. The radiator
is now ready for operation.

CLEANING AND CARE

• Wipe the surface clean with a soft damp cloth.
• Never use abrasive cleaners on this product as they will damage the
surface.
• Radiators are made of steel and should therefore not be cleaned with
corrosive or abrasive cleaning agents.
Step 8