User Information; The Correct Helmet Position; Adjusting The Single-Hand Twisting Fastener; Adjusting The Strap Divider - Crivit SP-80.3 Gebrauchsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Bicycle helmet SP-80.3

User information

• The helmet must always be levelly horizontal on your head.(Fig. A)

• If the helmet is too far forward, it can impair your vision.

• If the helmet is too far back, your forehead is not sufficiently protected. (Fig. B)

The integrated size-adjusting system can be adjusted using a turning knob at the back of

one's head (Fig. C):

• smaller = twist clockwise

• bigger = twist anti-clockwise

• Open the strap divider (Fig. D)

• The strap divider must be positioned in such a way, that the straps are taut but

comfortable. The strap divider must be below the ear, and the straps must not cover the

ears.

• Close the strap divider (Fig. E)

An open strap divider can lead to slipping of the helmet in the event

of an accident and thus to a loss of protection!!!

• The chin strap (Fig. G.3) has been adjusted correctly if you feel slight pressure when

you open your mouth. The buckle shall not be positioned on the jawbone.

• If the chin strap (Fig. G.3) is too loose it must be pulled tight using the winding (Fig.

G.2) on the fastener (Fig. G.1).

• If the chin strap (Fig. G.3) is too tight it must be loosened also using the winding (Fig.

G.2) on the fastener (Fig. G.1).

Please note that you must always make sure that the fastener is

closed before you ride !!! (Fig. F)

Please be aware that the helmet can only protect if it fits properly.

Please try out different sizes and choose the one in which the helmet

fits comfortably and sits firmly upon your head.

Inhaltsverzeichnis