Machine; Cutter; Storage - Mafell PF80 Originalbetriebsanleitung

The ball bearings used are greased for life. When the
machine has been in operation for a longer period of
time, we recommend to hand the machine in at an
authorised MAFELL customer service shop for
inspection.
Only use our special grease, order No. 049040 (1 kg
tin) for all greasing points.

6.1 Machine

The machine must be regularly cleaned off deposited
dust. The ventilation openings on the motor should be
cleaned with a vacuum cleaner.

6.2 Cutter

The milling cutters used on the machine must be freed
from resin regularly as clean tools improve the cutting
quality.
For cleaning, only acid-free but not highly alkaline
cleaning agents may be used.
Deresinification is carried out by soaking the cutters for
24 hours in paraffin or commercially available resin
remover.

6.3 Storage

If the machine is out of service for a lengthy period of
time, it should be thoroughly cleaned (see chapter 6.1).
Spray bright metal parts with a rust inhibitor.
Only store the machine in dry rooms and protected
from the effects of the weather.
-19-