Removing The Protective Net - Fujitsu Ten ECLIPSE TD 307 II Bedienungsanleitung

Removing the protective net

Tip
You can remove the protective net of the speaker if desired.
Protective net
Flat-tipped
screwdriver
Notch
1
Insert the end of a flat-tipped screwdriver into the
notch of the protective net, and lever it upward to
lift up the protective net.
Caution
Be careful not to damage the paper of the speaker
cone or the speaker housing when using a flat-
tipped screwdriver.
2
Remove the protective net.
- 14 -