Declaration Of Conformity - Paramondo LINE Montageanleitung

82

Declaration of conformity

Document no.:
Manufacturer / Contact Information:
Brand:
Model:
Product type:
Product type identification code:
Year of manufacture from:
Intended use:
Maximum dimensions (Width / Projection):
Wind resistance class:
We, Schoenberger Germany Enterprises GmbH & Co. KG, declare that the above-mentioned product in its design
and in the version placed on the market by us complies with the relevant essential performance and safety requi-
rements, prescribed by the EU directives stated below.
This declaration loses its validity if the use does not correspond to the intended purpose and in the event of
changes to the system or product that have not been agreed with the manufacturer.
EU Directives:
The motor type depends on the version.
For information on the motor type, see the motor's
declaration of conformity (motor type and motor data
are enclosed with the awning).
Applied /harmonised standards:
Signed for the manufacturer and
on behalf of the manufacturer by
Michael Mayer
CEO
Hohenschäftlarn
July 2020
*valid for part numbers (ID numbers) 1000019237 - 1000019266 and 10260758 - 10260787.
For a complete list of versions / types, please refer to the original declaration at:
https://www.paramondo.de/leistungs-konformitaetserklaerungen/
www.paramondo.de
DoC_SGE_ArtA_RM_20000609_202007
Schoenberger Germany Enterprises GmbH & Co. KG
Zechstr. 1-7
82069 Hohenschäftlarn
Tel.: +49 (0) 8178 932 932
info@schoenberger-group.com
www.schoenberger-group.com
paramondo
Line
Cassette awning with motor drive
20000609*
07/20
Application in the exterior of buildings
and other structures
600 x 300 cm
1
Machinery Directive 2006/42/EG
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Radio Equipment Directive 2014/53/EU
RoHS-Directive 2011/65/EU und 2015/863/EU
EN 13561:2015;
External blinds and awnings -
Performance requirements including safety;
EN 60335-2-97:2017-05
Household and similar electrical appliances - Safety -
Part 2-97: Particular requirements for drives for rolling
shutters, awnings, blinds and similar equipment